Stamina 5200 Owner's Manual page 7

ASSEMBLY INSTRUCTIONS
STEP 3
NOTE: RIGHT PEDAL(41)
The
has right hand threads and is tightened by turning clockwise. The
stamped on the end of the pedal shaft. The
tightened by turning counter clockwise.
RIGHT PEDAL(41)
Thread the
RIGHT PEDAL STRAP(42)
Select the
three hole end onto the inside edge of the
RIGHT PEDAL(41)
of the
adjustment holes which allow your foot to be easily removed from the pedals.
Use the same procedure to attach the
STRAP(40)
onto the
R
has stamped on the end of the pedal shaft. The
CRANK(7)
into the
which has
RIGHT PEDAL(41).
R
with the mark on the bottom of the
LEFT PEDAL(39)
LEFT PEDAL(39).
LEFT PEDAL(39)
as shown. Use a wrench to tighten the pedal securely.
R
marked on the bottom side of the strap. Snap the
Snap the other end onto the outside edge
RIGHT PEDAL STRAP(42).
CRANK(7)
onto the
7
RIGHT PEDAL(41)
LEFT PEDAL(39)
has left hand threads and is
LEFT PEDAL
and snap the
L
has
Select