Set Up Instructions - Stamina 5200 Owner's Manual

SET UP INSTRUCTIONS

5200 Magnetic Bike
Place the
33 1/4" long x 19 1/8" wide x 54" tall. An area 4 feet wide x 5 feet long is required for safe operation of the
5200 Magnetic Bike
5200 Magnetic Bike
Adjust the
LEVELING:
the floor without rocking.
5200 Magnetic Bike
The
MOVING:
(2).
Grasp on the
FUNCTION INSPECTION:
Visually inspect the
Check the function of the
verify that the drive train functions properly. Use the SET button on the
program and verify that the Magnetic System provides different tensions. Refer to the COMPUTER
INSTRUCTIONS on pages 12 to 14.
CAUTION:
Locate and read the
all users read the
in the area where it will be used. The
. Make sure that adequate space is available for access to and passage around the
.
LEVELING CAPS(53)
HANDLEBAR(5)
5200 Magnetic Bike
5200 Magnetic Bike
WARNING LABEL(73)
WARNING LABEL(73).
REAR STABILIZER(3)
on the
WHEEL CAPS(52)
has a pair of
and tip the
to verify that assembly is as shown in the above illustration.
. Turn the crank slowly through one complete revolution to
on the
10
5200 Magnetic Bike
so that the bike sets on
FRONT STABILIZER
on the
5200 Magnetic Bike
COMPUTER(29)
5200 Magnetic Bike
is approximately
forward to move.
to select a
. Make sure that