Table of Contents
Advertisement
Quick Links
Product May Vary Slightly From Pictured.
CAUTION:
Weight on this product should not exceed 250 lbs.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
www.staminaproducts.com
Customer Care
1 (800) 375-7520
Owner's
Manual
WARNING
!
Exercise can present a
h e a l t h r i s k . C o n s u l t a
physician before beginning
any exercise program with
this equipment. If you feel
faint or dizzy, immediately
d i s c o n t i n u e u s e o f t h i s
equipment. Serious bodily
i n j u r y c a n o c c u r i f t h i s
equipment is not assembled
and used correctly. Serious
bodily injury can also occur
if all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.
When calling for parts or
service, please specify
the following number :
Model#: 55-1550
STAMINA PRODUCTS
MADE IN CHINA
©
2016 Stamina Products, Inc.
2017, 04
!
Advertisement
Table of Contents
Related Manuals for Stamina 55-1550
Summary of Contents for Stamina 55-1550
- Page 1 CAUTION: Weight on this product should not exceed 250 lbs. This Product is Produced Exclusively by STAMINA PRODUCTS MADE IN CHINA 2040 N. Alliance, Springfield, MO 65803 Customer Care © 2016 Stamina Products, Inc. 1 (800) 375-7520 2017, 04 www.staminaproducts.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Safety Instructions ........2 Maintenance ..........16 Before You Begin ........4 Warranty ............. 17 Equipment Warning & Notice Labels ..5 Product Parts Drawing ......18 Hardware Identification Chart ....6 Parts List ............ 19 Assembly Instructions ........ 7 Notes ............ - Page 3 1 (800) 375-7520 customer.care@staminaproducts.com Hi! From all of us here at Stamina Products, thank you for your purchase. We know that you have big fitness goals in mind and we are here to help you along. Call us, email us, or send us a message on Facebook. Be sure to contact us if you have any questions on your new product.
-
Page 4: Before You Begin
BEFORE YOU BEGIN Thank you for choosing the inLine® Inversion Although Stamina constructs its products with Chair. We take great pride in producing this quality the finest materials and uses the highest standards product and hope it will provide many hours of... -
Page 5: Equipment Warning & Notice Labels
EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning and notice labels on the InLine® Inversion Chair. Please take a moment to familiarize yourself with all of the warning and notice labels. Labels are larger than actual size WARNING LABEL(62) WARNING Keep others including children &... -
Page 6: Hardware Identification Chart
HARDWARE IDENTIFICATION CHART This chart is provided to help identify the fasteners used in the assembly process. Place the washers or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws. -
Page 7: Assembly Instructions
ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. - Page 8 ASSEMBLY INSTRUCTIONS STEP 3 Attach the BACK FRAME(5) to the REAR FRAME(3) with BUTTON HEAD BOLTS (M10x1.5x65mm)(41), WASHERS(M10)(52), and NYLOCK NUTS(M10x1.5)(57) on both sides. STEP 4 Place the SWING BAR(9) into the gap in the SEAT FRAME(7), then secure by inserting the SHAFT(12) through the SEAT FRAME(7) and SWING BAR(9).
- Page 9 ASSEMBLY INSTRUCTIONS STEP 5 Attach the FRONT PIVOT ARMS(6) to the REAR FRAME(3) with BUTTON HEAD BOLTS (M10x1.5x65mm)(41), WASHERS(M10)(52), and NYLOCK NUTS(M10x1.5)(57) on both sides. STEP 6 Attach the SEAT FRAME(7) to the BACK FRAME(5) with BUTTON HEAD BOLT(M10x1.5x90mm)(40), WASHERS(M10)(52), and NYLOCK NUT(M10x1.5)(57). STEP 7 Attach the LINKAGE(8) to the BACK FRAME(5) with BUTTON HEAD BOLT(M8x1.25x85mm)(42), WASHERS(M8)(53), and NYLOCK NUT(M8x1.25)(58).
- Page 10 ASSEMBLY INSTRUCTIONS STEP 8 Refer to detail view A and the illustration below. Attach the ANGLE ADJUSTMENT BELT(16) to the FRONT SUPPORT(2) with BUTTON HEAD BOLT(M8x1.25x60mm)(44), WASHERS(M8)(53), and NYLOCK NUT(M8x1.25)(58). STEP 9 Refer to the bottom view of the illustration below. Align the hook and loop pad on the HINGE WEAR COVER(15) and the SEAT(13), then press them to attach together.
- Page 11 ASSEMBLY INSTRUCTIONS STEP 11 Attach the SEAT BELT(60) to the BACK FRAME(5) with FLAT HEAD BOLT(M6x1x20mm)(61) and WASHER(M10)(52). CAUTION: Always use the SEAT BELT(60). Make sure the SEAT BELT(60) is securely fastened before inverting. STEP 12 Refer to the Back View of the illustration below. Align the hook and loop pad on the HINGE WEAR COVER(15) and the BACK CUSHION(14), then press them to attach together.
- Page 12 ASSEMBLY INSTRUCTIONS STEP 13 Insert the upper end of the HANDRAIL(4) into the REAR FRAME(3) and secure with BUTTON HEAD BOLT(M8x1.25x40mm)(47). Do no tighten the bolt. Attach the lower end of the HANDRAIL(4) to the REAR FRAME(3) with BUTTON HEAD BOLT(M8x1.25x20mm)(48), BUTTON HEAD BOLT(M8x1.25x65mm)(43), and ARC WASHERS(M8)(54).
-
Page 13: Operational Instructions
OPERATIONAL INSTRUCTIONS GENERAL PRECAUTIONS 1. Do not use the InLine® Inversion Chair alone. Always have a helper available in case assistance is needed in recovering from the decline position. 2. Always use the SEAT BELT(60). Make sure the SEAT BELT(60) is securely fastened before inverting. 3. - Page 14 OPERATIONAL INSTRUCTIONS LEG HEIGHT ADJUSTMENT Proper adjustment of the LEG ADJUSTMENT FRAME(10) is very important. 1. Loosen the ADJUSTMENT KNOB(28) on the SWING BAR(9). 2. Pull the ADJUSTMENT KNOB(28) and slide the LEG ADJUSTMENT FRAME(10) to adjust. 3. Sit on the machine to make sure you feel comfortable with the FOAM PADS(36).
- Page 15 OPERATIONAL INSTRUCTIONS USING THE InLine® Inversion Chair 1. Always use the SEAT BELT(60). Make sure the SEAT BELT(60) is securely fastened before inverting. 2. Start by sitting on the machine and leaning back on the BACK CUSHION(14) with your hands at your side, or resting on your thighs.
-
Page 16: Storage
4. Worn or damaged components shall be replaced immediately or the InLine® Inversion Chair removed from service until repair is made. 5. Verify that the WARNING LABEL(62) is in place and easy to read. Call Stamina Products immediately at 1-800-375-7520 for a replacement WARNING LABEL(62) if it is missing or damaged. -
Page 17: Warranty
To implement this limited warranty, send a written notice stating your name, date, and place of purchase and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield Missouri, USA, 65801-1071, or email us at customer.care@staminaproducts.com, or call us at 1-800-375-7520. -
Page 18: Product Parts Drawing
PRODUCT PARTS DRAWING BACK FRONT... -
Page 19: Parts List
PARTS LIST PART# PART NAME Front Frame Front Support Rear Frame Handrail Back Frame Front Pivot Arm Seat Frame Linkage Swing Bar Leg Adjustment Frame Lever Shaft Seat Back Cushion Hinge Wear Cover Angle Adjustment Belt Round Stand Bumper Sleeve Round Plug (19 mm) Oval Endcap (20 x 60mm) Square Plug (33.4 x 33.4mm) - Page 20 PARTS LIST PART# PART NAME Bolt, Button Head (M8 x 1.25 x 20mm) Bolt, Round Head (M6 x 1 x 55mm) Bolt, Round Head (M6 x 1 x 35mm) Bolt, Round Head (M6 x 1 x 20mm) Washer (M10) Washer (M8) Arc Washer (M8) Washer (M6) Arc Washer (M6)
-
Page 21: Notes
NOTES... -
Page 22: Fax/Mail Ordering Form
P.O. Box 1071 Springfield, MO. 65801-1071 Would you like to recieve email information or special offers from Stamina Products? Register at contact.staminaproducts.com TO REGISTER YOUR PRODUCT To enact your warranty, please register your product by going to register.staminaproducts.com. Please have your product model number (printed on the cover of this owner’s manual) and the serial number (printed on the black and white sticker on your...