Table of Contents
Advertisement
Basic of Assembly
5
Attachment of Belt supports and Tension pulley assembly
1. Set the belt support upper adjust to the belt support upper, and tighten the two screws (screw, pan (S/P
washer) M3x6) temporarily.
*Key point
• Fully tighten the screw after performing
2. Set the tension pulley assembly, and tighten the screw (screw, pan (S/P washer) M4x10) temporarily.
*Key point
• Fully tighten the screw after performing
3. Set the belt support lower adjust to the side feed assy, and tighten the two screws (screw, pan (S/P
washer) M3x6) temporarily.
*Key point
• Fully tighten the screw after performing
Screw, pan (S/P washer) M3x6
Belt support upper adjust
Lower driving mechanism
"Adjustment of Timing belt and belt support upper/lower
"Adjustment of Timing belt
"Adjustment of Timing belt and belt support upper/lower
Side feed assy
2 - 38
24
tension".
Screw, Pan (S/P washer) M3X6
Screw, Pan (S/P washer) M4X10
Belt support upper
Tension pulley assembly
Screw, pan (S/P washer) M4x10
Screw, pan (S/P washer) M3x6
Belt support lower adjust
clearance".
clearance".
Advertisement
Table of Contents
Need help?
Do you have a question about the Mid-Line Machines and is the answer not in the manual?
Questions and answers