Baby Lock Meridian 2 Software Update

March 2024
Introduction
If the software version of your Meridian 2 (Model BLMA2) is earlier than version 2.11, an update
program is now available for download to improve its performance.
Version 2.11 update will provide the following changes:
1. Improved PHX data compatibility with multi-needle embroidery machines.
How to confirm the software version of your BLMA2
1. Press the power switch to "|" to turn on your machine.
2. If the opening movie is played, touch anywhere on the LCD screen.
3. Press (Machine setting key) to display the machine's settings screen.
4. The machine's settings screen appears.
5. Switch the settings screens by using
display the machine's program version.
6. Check the version shown on the display as described below.
Baby Lock Meridian 2
(Model BLMA2)
Software Update Version 2.11
Copyright  2004-2024 Baby Lock USA
Customer Support: 1-800-313-4110
BLMA2 Ver.2.11 Software Update – p.1
(Previous page key) or (Next page key) to