THORLABS MCLS2-CUSTOM User Manual page 11

MCLS2-CUSTOM 4-Channel Laser/SLD Source
•
Use low power settings, beam shutters, and laser output filters to reduce the beam power to less
hazardous levels when the full output power is not required.
•
Make sure that spectators are not exposed to hazardous conditions.
•
Operate the laser only in a well-controlled area (for example, within a closed room with covered or filtered
windows and controlled access).
•
Label laser area and room with appropriate Class 3B or Class 4 laser warning signs.
•
Mount the laser on a firm support to ensure that the beam travels along the intended path.
Additionally, it is necessary to connect the fiber patch cable(s) you will be using to the MCLS2-CUSTOM fiber
outputs ports before enabling the lasers, both for safety reasons and fiber care. Please see section 5.2 regarding
cleaning of fiber tips in order to prevent fiber damage and system degradation.
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
488 nm
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
633 nm
INVISIBLE LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
730 nm
Page 8
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
450 nm <35 mW
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
<25 mW 488 nm
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
<60 mW 637 nm
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
660 nm <80 mW
<25 mW
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
406 nm
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
473 nm <30 mW
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
<60 mW 520 nm
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
<90 mW 642 nm
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
685 nm <25 mW
INVISIBLE LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
785 nm
Chapter 2: Safety
<15 mW
<35 mW
<30 mW
<15 mW
TTN353580-D02