Workplace Safety; Operational Safety; Product Safety - Endress+Hauser Proline 200 Brief Operating Instructions

Safety instructions
NOTICE
Verification for borderline cases:
‣
For special fluids and fluids for cleaning, Endress+Hauser is glad to provide assistance in
verifying the corrosion resistance of fluid-wetted materials, but does not accept any
warranty or liability as minute changes in the temperature, concentration or level of
contamination in the process can alter the corrosion resistance properties.
Residual risks
CAUTION
L
The electronics and the medium may cause the surfaces to heat up or freeze. Risk of
burns or frostbite!
‣
Mount suitable touch protection.
2.3

Workplace safety

When working on and with the device:
‣
Wear the required personal protective equipment as per national regulations.
2.4

Operational safety

Risk of injury!
‣
Operate the device only if it is in proper technical condition, free from errors and faults.
‣
The operator is responsible for the interference-free operation of the device.
2.5

Product safety

This measuring device is designed in accordance with good engineering practice to meet state-
of-the-art safety requirements, has been tested, and left the factory in a condition in which it
is safe to operate.
It meets general safety standards and legal requirements. It also complies with the EU
directives listed in the device-specific EU Declaration of Conformity.Endress+Hauser confirms
this by affixing the CE mark to the device.
Furthermore, the device meets the legal requirements of the applicable UK regulations
(Statutory Instruments). These are listed in the UKCA Declaration of Conformity along with
the designated standards.
By selecting the order option for the UKCA marking Endress+Hauser confirms the successful
testing and assessment of the device by affixing to it the UKCA mark.
Contact address Endress+Hauser UK:
Endress+Hauser Ltd.
Floats Road
Manchester M23 9NF
United Kingdom
www.uk.endress.com
8
Flowmeter Proline 200 PROFINET with Ethernet-APL
Endress+Hauser