On Delivery - cytiva AKTA process Unpacking Instructions Manual

2

On delivery

When you receive the delivery
Follow the instructions below when you receive the delivery.
Step
1
2
3
Storage site requirements
For short term storage of the system in its transport crate, the area used for storage
must be an indoor environment that fulfils the following conditions:
Property
Ambient temperature, storage
Relative humidity
Note:
ÄKTA process Unpacking Instructions 29605009 AD
Action
Inspect the crate for signs of damage. If any damage is observed, record this
on the receiving documents.
Move the crate to a protected indoor location for temporary storage or
immediate unpacking. Follow the instructions in
on page 7 when moving the crate.
Contact your Cytiva representative and inform of the delivery and of any
damage that has been observed. Inform also about anything written on the
receiving documents concerning transportation damage.
The air humidity and air temperature differences at the storage site should
be kept as low as possible to prevent condensation and corrosion.
Transport in crate,
Value
2°C to 35°C
20% RH to 80% RH, non-condensing
5