Attach Operator Console To The System - cytiva AKTA process Unpacking Instructions Manual

6

Attach operator console to the system

Assemble monitor and console arm
The operator console is packed separately into three boxes that are placed in the
system transport crate. The operator console needs to be assembled and installed on
the system.
The operator console can be fitted on either the left or right handle of the system. A
rotation stop is fitted to prevent the console from colliding with the electrical cabinet of
the system. Instructions for fitting the console are given in
the right handle, on page 19
on page 21.
Follow the steps to assemble the operator console:
Step
1
ÄKTA process Unpacking Instructions 29605009 AD
WARNING
Personal Protective Equipment (PPE). When packing,
unpacking, transporting or moving the product, wear the following.
•
Protective footwear, preferably with steel toe-cap.
•
Working gloves, protecting against sharp edges.
•
Protective glasses.
CAUTION
Heavy object. Two persons are required to assemble and lift the
operator console.
NOTICE
Operator console
•
Do not use the operator console to push or drag the system
•
Do not lean on the console
The console arm is only designed to support the weight of the
operator console.
and
Action
Open the boxes and remove the console screen, keyboard, and console arm.
Fit the operator console on the left handle,
Fit the operator console on
17