SMITH SYSTEM Constellate Double Sided Library Storage Assembly Instructions Manual page 11

10. Take the header brackets and line them up to the top edge of the legs as shown. The
top of the header bracket should be along the same plane as the top of the leg and
the front of the header bracket should be parallel with the front of the leg.
11. Secure each header bracket with two (2) #10x7/16" machine screws to the legs as
shown. Make sure to keep the header bracket parallel with the top and front of the
leg. Do NOT overtighten, you just need to get the screw snug.
Document #: 179725
Assembly Instructions
11
REVISED: 02/2024