Feature And Option List - Directechs DIRECTWIRE DIECTED DB3 Installation Manual

Feature and option list

It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing page at
www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the information on this
page.
* Default option
Feat
Operation Flashes / Option
.
1. No RF Output*
1 RFTD Output Type
2. RFTD Output
3. SmartStart
1. Disabled*
2 OEM Alarm
Override
2. Enabled
1. Without OEM
3 OEM Remote Starter
Remote Starter*
Equipped
2. With OEM Remote
Started
20
403.FORD11 2.07 2013 Ford Fusion
©2022 VOXX•DEI LLC. All rights reserved.
Description
Module is connected to a remote starter using a standard installation.
Module is connected to an XL202 using an RSR or RXT installation (when available).
Module is connected to SmartStart using an RSR or RXT installation (when available).
The OEM alarm can only be controlled with the OEM remote. The aftermarket system cannot disable the OEM
alarm if it is triggered.
The OEM alarm will never be armed, even when arming with the OEM remote. When locking with the OEM
remote, the vehicle will lock 1 second after the command was received. An aftermarket alarm/hybrid system is
recommended.
The vehicle is NOT equipped with an OEM Remote Start System.
The vehicle is equipped with an OEM Remote Start System.