Icom IC-M410BB Instruction Manual page 17

16 SOFTWARE KEYS
Software key functions are displayed.
17 TIME ZONE
The current time is displayed when valid
GPS data is received, or the time has
been manually entered.
• "NO TIME" is Displayed when valid GPS
data is not received or time has not been
manually entered.
• "??" blinks every 2 seconds instead of the
time when the GPS current time is invalid.
L After 23.5 hours has passed, "NO TIME"
will be displayed.
• "??" blinks every 2 seconds instead of
the time after 4 hours have passed since
you manually entered the time.
• "LOCAL" is displayed when the offset
time is set.
• "MNL" is displayed when the time was
manually entered.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
PANEL DESCRIPTION
(p. 5) 18 POSITION
The current position is displayed when
valid GPS data is received, or the
position has been manually entered.
• "NO POSITION" is displayed when valid
GPS data is not received or your position
has not been manually entered.
• "??" blinks every 2 seconds instead of your
position when the GPS position is invalid.
L The last position is held for only 23.5
hours. After that, "NO POSITION" will
be displayed.
• "??" blinks every 2 seconds instead of
the position after 4 hours have passed
since you manually entered your position.
L The manually entered position is
held for only 23.5 hours. After that,
"NO POSITION" will be displayed.
19 SCAN INDICATOR
• "SCAN" is displayed during a Normal
scan.
• "SCAN 16" is displayed during a Priority
scan.
• "DUAL 16" is displayed during Dualwatch.
• "TRI 16" is displayed during Tri-Watch.
20 ATTENUATOR INDICATOR
(For only the USA version)
Displayed when the Attenuator function
is turned ON.
2
2
(p. 14~16)
(p. 79)
4