Setting Favorite Channels (Except For The Nld Version); Starting A Scan (Except For The Nld Version) - Icom IC-M410BB Instruction Manual

5
SCAN OPERATION
■ Setting Favorite channels
(Except for the NLD version)
You can quickly recall often-used channels by setting them as Favorite channels. You can
set Favorite channels in each Channel Group.
1. Select a Channel Group on the Menu screen. (p. 9)
[MENU] > Settings > Radio > Channel Group
2. Push [▲] or [▼], or rotate [DIAL] to select the channel.
3. Push [◄] or [►] to display
4. Push
• The selected channel is set as a Favorite channel, and "
L To cancel the setting, push
TIP: You can set all channels as Favorite channels, clear all settings, or reset to the
defaults. By default, some channels are preset as Favorite channels. The preset
channels diff er, depending on the transceiver version.
■ Starting a scan
(Except for the NLD version)
Example: Starting a Normal Scan.
1. Select a Channel Group on the Menu screen.
[MENU] > Settings > Radio > Channel Group
2. Push [◄] or [►] to display
3. Push
• The scan starts.
• "SCAN" is displayed during a Normal Scan and
"SCAN 16" is displayed during a Priority Scan.
• "SCAN" and
is received.
L When a signal is received, the scan pauses
until it disappears, or resumes after 5
seconds, depending on the Scan Timer
setting in "Radio Settings."
L A beep sounds and "16" blinks when a signal
is received on Channel 16 during a Priority
scan.
4. To stop the scan, push
TIP: To properly receive signals, be sure to
adjust the squelch to a suitable level.
15
.
.
are displayed when a signal
.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
.
again.
.
" is displayed.