Tektronix SignalScout RFM150 User Manual page 125

The REM 150 contains nine fixed channel tables, which can be
edited, but can not be deleted. The four fields that can be edited
through the RFM 150 menus are: skip (yes/no), scrambled (yes/no),
dwell time (short or long) and amplitude offset (in dB). The com-
panion CSS150 package allows editing of additional fields, as well
as the creation of custom channel tables. Fixed tables can be used as
a basis for creating these custom channel tables. Refer to the
CSS 150 User Manual for instructions. Another way of setting up
channel tables is to "clone" the configuration of another RFM 150.
This appendix section defines the nine fixed channel tables. The
information given above each table represents data that is the same
for every channel in that table. This includes the defaults for the
four editable fields. Blanks are provided to fill in new values when
the fields are edited. A blank table appears at the end of the section,
to allow for custom channel tables.
REM 150 SignalScout B-1