Pole Mount (Optional) - Ruijie RG-AP9861-R Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
3.4.4

Pole Mount (Optional)

Note
Hose clamps and other accessories used for pole mount are customer-supplied.
(1) Install the security screw on the mounting bracket. Leave no gap between the bracket surface and the base
of the screw's head.
Figure 3-14 Installing the Security Screw on the Mounting Bracket
(2) Secure the mounting bracket by threading two hose clamps through the square holes (indicated by letter C
in Figure 3-1Mounting Bracket
Figure 3-15 Installing the Mounting Bracket
(3) Align the mounting posts on the bottom of the AP with the mounting holes on the mounting bracket. Slide the
AP in the orientation indicated by the arrow onto the mounting bracket until it clicks in place.
Dimensions) on the mounting bracket. Tighten the screws on the clamps.
24
Installing the Access Point