Omron ZS Command Reference Manual page 2

Introduction
Thank you for purchasing the ZS Series. This manual provides information regarding
operations and input/output formats for the communication between ZS Series controllers
and external devices using the Omron proprietary protocol, CompoWay/F.
This manual provides information for the following models and versions.
Model
ZS-LDC
ZS-HLDC
ZS-MDC
ZS-DSU
* Different firmware versions may cause communication errors, unintended setting
overwrite, and damages on the controller. Please make sure to use the controller with
the correct software version.
If your software version is not listed in the table above, please update the software
using the SmartMonitorZS firmware update software, such as WarpEngineZS, to
match the software version.
When using the ZS Series, be sure to observe the following:
- The ZS Series must be operated by personnel knowledgeable in electrical engineering.
- To ensure correct use, please read this manual thoroughly to deepen your
understanding of the product.
- Please keep this manual in a safe place so that it can be referred to whenever
necessary.
Firmware Version
v2.000 or later
v1.000 or later
v2.000 or later
v2.000 or later