Item Overview (Angle) - Omron ZFX - SHORT MANUAL V1.0 Manual

4-10 ITEM Overview (Angle)

4-10 ITEM Overview (Angle)
Setup
Measurement region
Change of brightness: light -- > dark
This item uses two "Position"items. Specifically this Item finds the two edges
in two measurement regions and outputs the angle between two edge points.
Angle
Angle is calculated according to the
positional relationship between the 2
edge positions.
Another setting
Color mode
Measurement mode 1, 2
Split size 1, 2
Color 1, 2
Edge level 1, 2
Noise level 1, 2
Noise width 1, 2
Measurement
The edges are searched in the two measurement regions
according the preset direction and change of brightness. The
inclination of the straight line made by two points is calculated.
: Edge position 1
Filter mode (default) / Pickup mode
This is same setting as position. (See the "Position")
Average (default) / Peak / bottom
This is same setting as position. (See the "Position")
1 to 99 (default value : 1)
This is same setting as position. (See the "Position")
Light --> Dark (default) / Dark --> Light
This is same setting as position. (See the "Position")
0 to 100 (%) (default value: 50)
This is same setting as position. (See the "Position")
0 to 255 (default value: 20)
This is same setting as position. (See the "Position")
0 to 255 (default value: 0)
This is same setting as position. (See the "Position")
Item Overview
: Edge position 2
-180 to 0°
0 to 180°
53