Table of Contents
Advertisement
4-5 ITEM overview (Area)
4-5
ITEM overview (Area)
46
The area, gravity and angle of the desired color can be measured. Therefore,
the size, the position and the inclination of the measurement target can be
inspected.
When color camera is connected to the controller, up to four colors can be
specified as the measurement colors.
When monochrome camera is connected, black-and-white image is binarized.
White pixels are targeted in measurement.
Setup
The colors of the measurement
target are picked up.
Another setting
Measure axis
ON / OFF (default)
angle
Set whether or not to measure the angle.
(When selecting [ON], the processing time increases.)
Fill profile
ON / OFF (default)
This is efficient, when passed products doesn't have the uniformity
inside but has a same outer shape.
Passed products
When measuring the outer shape of the measurement target, set
this to [ON]. If this is set to [ON], all of the area between the start
point and the end point inside the measurement region are mea-
sured as the measurement target color.
Start point: untargeted color --> trageted color
End point: targeted color --> untargeted colors
Input image (Fill profile: OFF)
Start
point
Pixels that are measurement target color are not recognized as
the start point as pixels that are colors outside of measurement
target are next scanned.
Notice:
The color pickup isn't done by clicking [AUTO] in the
measurement Item. Please select the pick up color in
the color pickup screen.
Measurement
Measurement
region
Area
The area, gravity and angle
of the desired colors can be
measured, based on the total
pixels of desired colors.
End
point
Item Overview
θ
Angle
Gravity
Fill profile: ON
Register model
Reference model
Search region
TEA
Reference point
Img Adj
Detail
Region
Limits
AUTO
Advertisement
Table of Contents
