Table of Contents
Advertisement
4-6 ITEM Overview (Labeling)
Outside trimming
ON / OFF (default)
This is efficient, when around the measurement region there are the measurement colors that are
not required in measurement.
e.g.
When [ON] is set, the entire region outside of measurement region is measured as the color to be
measured. (When selecting [ON], the processing time increases.)
Outside trimming: ON
Sort mode: Area descending order
When "Label No." is set to "1", it is easy to get the position and area of measurement target.
Area judgement
0 to 9999999.999 (default value: 0)
Set the minimum area to be counted as a label. Set a larger value than size of noise when noise is
counted as a label.
e.g.
Input image
Sort mode: X gravity descending order
When "Label No." is set to "0", it is easy to get the position and area of measurement target.
48
Measurement region
Measurement target
Measurement color which is not required
in measurement
The biggest label
The second biggest label (measurement target)
Similar size
Measurement target
Noise
Notice:
The color pickup isn't done by clicking [AUTO] in the
measurement Item. Please select the pick up color in
the color pickup screen.
Set this to the larger value than noise
Item Overview
Register model
Reference model
TEA
Search region
Reference point
Img Adj
Detail
Limits
Region
AUTO
Advertisement
Table of Contents
