Table of Contents
Advertisement
3-4 Settings and Adjustments
3-4-2
Video Configuration
Install the RGB and Video Input Unit on the PT to display video images on the PT
from video cameras or Vision Sensors connected to the Unit. Video Configuration
can be used to adjust the contrast of images and to output to the Vision Sensor
console.
Opening the Video Configuration Window
The Video Configuration Window is accessed from the System Menu.
(1) Display the Special Screen Tab Page from the System Menu and select Video
Configuration from the Special Function field. Then, click the Start Button.
Exiting Video Configuration
Click the Back Button on the bottom right side of the Video Configuration Window to
exit Video Configuration. The window will return to the System Menu.
3-20
Advertisement
Table of Contents
