Omron NS - MANUAL 2 Operation Manual page 27

Disconnecting Video Input Connectors
(1) Unlock the BNC socket on the camera's video output cable by pressing it in
and twisting it counterclockwise.
Push
(2) After unlocking the BNC socket, pull it out.
(3) If the camera's video output cable uses an RCA plug, connect it to the video
input connector using a BNC-RCA connector as way shown below.
Video input connector (BNC)
BNC-RCA connector (See note.)
RCA plug
* The BNC-RCA connector is not provided with the RGB and Video Input Unit (NS-CA002).
2-4 Connecting Video Input Connectors
Twist counterclockwise
Pull out
2-11