Introduction - Omron NS - MANUAL 2 Operation Manual

Introduction

Thank you for purchasing an RGB and Video Input Unit for the NS-series PT.
The RGB and Video Input Unit is an Expansion Unit that is installed on an NS-series
Programmable Terminal (PT) to display RGB signals from analog signal output devices,
such as personal computers, or pictures from devices such as video cameras and
Vision Sensors.
Refer to the NS Series Setup Manual, the NS Series Programming Manual, the
CX-Designer Operation Manual, and CX-Designer online help for details on the
functions and performance of the PT.
●
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of
electrical systems (an electrical engineer or the equivalent).
Personnel in charge of introducing FA systems into production facilities
• Personnel in charge of designing FA systems
• Personnel in charge of installing and connecting FA systems
• Personnel in charge of managing FA systems and facilities
●
Notice
This manual provides information for connecting and setting up an RGB and Video
Input Unit for the NS-series PT. Be sure to read this manual before attempting to use
the Unit and keep this manual close at hand for reference during installation and
operation.
●
General Precautions
• The user must operate the product according to the performance specifications
described in the operation manuals.
• Do not use the PT touch switch input functions for applications where danger to
human life or serious property damage is possible, or for emergency switch
applications.
• Before using the product under conditions which are not described in the manual
or applying the product to nuclear control systems, railroad systems, aviation
systems, vehicles, combustion systems, medical equipment, amusement
machines, safety equipment, and other systems, machines and equipment that
may have a serious influence on lives and property if used improperly, consult
your OMRON representative.
• Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide the
systems, machines, and equipment with double safety mechanisms.
• This manual provides information for connecting and setting up an NS-series PT.
Be sure to read this manual before attempting to use the PT and keep this manual
close at hand for reference during installation and operation.
7