Table of Contents
Advertisement
1-1 RGB and Video Input Unit Features
1-1 RGB and Video Input Unit Features
Install the RGB and Video Input Unit (NS-CA002) on the PT Expansion Interface to
display external video images or analog RGB pictures on the PT. The Unit is an
option for NS-series PTs.
● Features
• Two video input ports (composite NTSC/PAL signal)
Video input cannot be used on an NS15.
• One analog RGB input port
Display resolution
Horizontal frequency
Vertical frequency
• One port for console output to a Vision Sensor Controller (same function key
operations as the F160-KP)
• Selectable video display size (and positionable displays)
• Overlapping on video displays (Functional objects and pop-up screens can
overlap video displays.)
* The above features apply only to PTs on which the RGB and Video Input Unit (NS-CA002) can be
installed. Refer to 1-2 System Configuration for details.
* There are restrictions in installing an NS-CA002 RGB/Video Input Unit on an NS15 V2 PT. Refer to
1-3 Restrictions in Installing an NS-CA002 RGB/Video Input Unit on an NS15 PT for details.
Precautions
for Correct Use
Video Input Specifications
Item
Input system
Scanning system (See note.)
Input signal
Signal input connector
Note: The NS-series PTs do not support progressive scanning (i.e., non-interlaced scanning).
1-2
1,024 x 768 (mounted to an NS15 PT)
800 x 600 (mounted to an NS12 PT)
640 x 480 (mounted to an NS10 or NS8 PT)
48.4 kHz (mounted to an NS15 PT)
37.5 kHz (mounted to an NS12 PT)
31.5 kHz (mounted to an NS10 or NS8 PT)
60 Hz
The NS-series PTs support video input for standard NTSC and PAL signals.
Display may not be possible, however, if the input signal deviates from the
standard signal. Before operation, be sure to check the output signal of the
camera to be used. If display cannot be made, take measures so that the input
signal is a standard signal.
Specifications
NTSC (RS-170A compliant) or PAL
Interlaced
1.0 V p-p 75 Ω
BNC connector
Advertisement
Table of Contents
