Table of Contents
Advertisement
2-2 Nomenclature and Functions
This section describes the names and functions of RGB and Video Input Unit parts.
RGB and Video Board: Front View
Analog RGB Input Connector
D-sub 15-pin connector
(Mini) used to connect a
device, such as a computer,
that outputs analog RGB
signals and allows displaying
pictures on the PT.
RGB and Video Board: Rear View
Expansion Interface Connector
Connects to the PT's expansion interface
connector when mounting the RGB and
video board.
2-2 Nomenclature and Functions
Two Video Input Connectors
Console Port Connector
Connects to the console
connector of an OMRON Vision
Sensor and allows Vision
Sensor settings and other
operations to be performed from
the PT.
Positions of screws for attaching
the board to the PT
Contrast Adjustor
Used to adjust the contrast of the
video input. Both channels are
adjusted together and cannot be
adjusted individually.
BNC-type connectors for inputting
NTSC/PAL signals.
2-3
Advertisement
Table of Contents
