Table of Contents
Advertisement
3-3 Console Connection
Reference
Video Control - Vision Sensor Console can be selected for the Object Control field of
the Multifunction Object properties to use the same settings and operation and those
for a command button.
Reference
3-18
• The operation of the command button is different between the NS15
and other PTs if SHIFT is selected as the control signal.
• NS15: The ON/OFF status will change each time the command
button is pressed.
• Other PTs: The command button will be ON while it is pressed
and will turn OFF when it is released.
• If SHIFT is attached to other control signals and sent to an OMRON
Vision Sensor, press another signal button while pressing the SHIFT
button. When attaching the SHIFT signal with the NS15, however,
press the SHIFT button once to turn it ON and then press another
button, and then press the SHIFT button again to turn it OFF.
Multifunction Object with the signal type set to SHIFT cannot be used
as a button with the NS15.
Advertisement
Table of Contents
