Table of Contents
Advertisement
Reference
6. Transfer the newly created screen data to the NS-V1/V2 PT.
Save the newly created screen data, and then transfer it to the PT. Refer to
Transferring Data to the PT in the CX-Designer's online help for details.
Reference
Property Settings for Video Display Objects
This section describes video display items in the Functional Objects Properties
Dialog Box from the RGB Display Window.
General
Image Position
Size/Position
• Pop-up screens and keypads cannot be seen with an RGB image
displayed because the RGB image is a full-screen display at the top
layer on the PT.
• Do not create other functional objects with an RGB image displayed.
The objects cannot be seen because the RGB image is a full-screen
display at the top layer on the PT.
• For an RGB display, the video display object must be the size of the
entire screen. The size cannot be changed.
• Mounted to the NS10 or NS8 PT: 640 x 480 dots (W × H)
• Mounted to the NS12 PT: 800 x 600 dots (W × H)
• Mounted on the NS15 PT: 1024 x 768 dots (W × H)
• A video display object cannot be placed with all or part of it off the
screen.
• Video display objects can be placed on normal (base) screens only.
They cannot be placed on pop-up screens, sheets, or frames.
• Only one video display object can be placed on a screen at a time.
Video displays cannot be performed on the NS5- V1/V2. Do not transfer
screen data containing video image to an NS5-V1/V2 PT.
Sets the video display object to display an RGB image.
-
-
3-1 Display
3-11
Advertisement
Table of Contents
