CyberData Part #010861 Operation Manual page 22

16 Installing the VoIP Loudspeaker Amplifier
Configure the Loudspeaker Amplifier Parameters
Web Page Item
CyberData Corporation
3. After changing the parameters, click Save Settings. This updates the changed parameters and
reboots the speaker if appropriate.
4. Connect the speaker to the target network.
5. From a system on the same network as the speaker, open a browser with the new IP address of
the speaker.
Table 2-9. Network Setup Parameters
Description
Link to the Speaker Setup page.
Link to the SIP Setup page.
Link to the MGROUPS Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
930106C VoIP Loudspeaker Amplifier Operations Guide