Table of Contents
Advertisement
6
Installing the VoIP Loudspeaker Amplifier
Loudspeaker Amplifier Setup
2.2 Loudspeaker Amplifier Setup
Set up and configure each loudspeaker amplifier before you mount it.
CyberData delivers each loudspeaker amplifier with the factory set default values indicated in
Table
Parameter
IP Addressing
IP Address
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
2.2.1 Loudspeaker Amplifier Components
Figure 2-1
CyberData Corporation
2-2:
shows the components of the loudspeaker amplifier (PoE).
Figure 2-1. Loudspeaker Amplifier Components—PoE
Table 2-2. Factory Default Settings
Factory Default Setting
static
192.168.3.10
admin
admin
255.255.255.0
192.168.3.1
930106C
VoIP Loudspeaker Amplifier Operations Guide
LEDs
Ethernet connection
RTFM switch
Volume
Speaker connection
Advertisement
Table of Contents
Need help?
Do you have a question about the Part #010861 and is the answer not in the manual?
Questions and answers