Changing The Display Image - Omron F400 - 06-1999 Operation Manual

Display Settings
5-4-2

Changing the Display Image

When in Monitor or Run mode, stored images can be displayed on the screen. By dis-
playing a stored image on the screen, the reason for a previous NG judgement can be
checked. Also, measurement can be re-performed on the stored image with different
evaluation criteria. The message in the lower-right corner of the screen indicates the
type of image being displayed.
(Refer to the following table.)
Display
Freeze/through
Color frz
Color thr
jfrz
jthr
_(Mem j)
Last (Mem j)
Scn 0BMONB
The image that has just been measured is displayed. Whether this image is
a freeze image or a through image depends on the settings in SYS/Display . a freeze image or a through image depends on the settings in SYS/Display
The image taken by the Camera is displayed without adjustment.
An adjusted image is displayed.
One of the following appears in j:
Color Filter Mode: Colorgray, Red, Green, Blue, Gray
Color Pickup Mode: Pickup
A previously stored image is displayed. Up to 16 (Mem 0 to 15) images are
stored in accordance with the conditions for storage of measured images
(only NG or All). When the image is to be backed up to a personal computer,
specify a memory number in j.
The measured image most recently stored is displayed. If this image had an
NG judgement, "Last" will be in reverse black/white.
— Filter/Pickup —
OK 67ms
Colorgray
Details
Section 5-4
103