Menu Operations; Screen Displays; Input Devices - Omron F400 - 06-1999 Operation Manual

Menu Operations

2-1 Menu Operations
2-1-1

Screen Displays

The F400 is operated by selecting functions from the screen. Highlighted text indi-
cates the current cursor position. The screen is shown in the following diagram.
Scn
Color bar
Scene The current scene number is displayed. There are 16 scenes that can be created to
Number
change the measurement conditions easily.
B Mark Options will appear when an item with the B mark is selected.
Mode The current operating mode is displayed. The modes are Set, Monitor, Run, System,
and Save. The operating modes are described in the following table.
Mode
SET Used to set measurement conditions.
MON (Monitor) Used to confirm whether or not the measurement is being performed correctly under the set
conditions and make adjustments if required. In this mode, measurement results are
displayed on the video monitor only and are not output to an external device.
RUN Used to perform object measurements. Outputs measurement results to an external device
via terminal blocks or RS-232C.
SYS (System) Used to make F400 system settings.
SAVE Saves settings to flash memory. Always save altered settings before exiting.
Cursor The selected text is highlighted.
Position
The type of image displayed on the video monitor is shown. Refer to Section 5-4-2
Displayed
Image
Changing Displayed Images .
Key The keys that can be used and their corresponding functions are displayed at the bot-
Operations
tom of the screen.
Color Bar The F400 will be in Color Filter Mode if the color bar is displayed and in Color Pickup
Mode if the color bar is not displayed.
2-1-2

Input Devices

The menu operations are performed from either the Console or the RS-232C port.
8
Scene number
B Mark
0BMONB
Key operations
---- --ms
Color thr
Meaning
p. 103
Section 2-1
— Filter/Pickup —
Mode
Cursor
position
Displayed
image
— Filter/Pickup —