Selecting Scene Modes - Omron F400 - 06-1999 Operation Manual

Starting and Quitting
3. Turn ON the power supply to the F400.
4. After a short pause, the main F400 screen will be displayed.
Note The startup scene and startup mode that appear when power is turned ON can be set.
Use these settings to make daily operation more efficient once the F400 is ready for
actual operation.
2-2-2

Selecting Scene Modes

The F400 has two scene modes: Color Filter and Color PickUp. Select the appropri-
ate measurement mode for the application.
Refer to Features in the Introduction Manual (Z131)
Select the scene mode when setting conditions for a scene for the first time.
1. Select MON (Monitor) and press the ENT Key
The title page will be displayed.
Vision Inspection System
F400-C10 Series
Color-Gray Menu Software
Ver.2.00
(C)Copyright OMRON Corporation
1998-1999
All Rights Reserved
The following screen will appear the first time power is turned ON.
Scn 0BMONB
Startup Mode on p. 107
---- --ms
3
Color thr
— Filter/Pickup —
p. 5
Section 2-2
2
15