Real-Time Clock; Tcp/Ip Sample Programs; Lcd/Keypad Module Sample Programs - Rabbit RabbitCore RCM3400 User Manual

—Demonstrates how to use analog input THERM_IN7 to calculate
•
THERMISTOR.C
temperature for display to the
thermistor is the one included in the Development Kit whose values for beta, series
resistance, and resistance at standard temperature are given in the part specification.
•
DNLOADCALIB.C
back to simulated EEPROM in flash with using a serial utility such as Tera Term.
•
UPLOADCALIB.C
block in flash memory and then transmitting the file using a serial port and a PC serial
utility such as Tera Term. Use
created by this program.

3.2.3 Real-Time Clock

If you plan to use the real-time clock functionality in your application, you will need to set
the real-time clock. Set the real-time clock using the
the Dynamic C
SAMPLES\RTCLOCK
sample program in the Dynamic C
RTC_TEST.C
additional examples of how to read and set the real-time clock.

3.2.4 TCP/IP Sample Programs

Sample programs demonstrating the TCP/IP associated with the Prototyping Board are
described in Appendix C.

3.2.5 LCD/Keypad Module Sample Programs

Sample programs for the optional LCD/keypad module are described in Appendix D.
18
STDIO window. This sample program assumes that the
—Demonstrates how to retrieve analog calibration data to rewrite it
—Demonstrates how to read calibrations constants from the user
DNLOADCALIB.C
folder, using the onscreen prompts. The
to download the calibration constants
sample program from
SETRTCKB.C
SAMPLES\RTCLOCK
folder provides
RabbitCore RCM3400