9.
Declaration of incorporation
Herewith we declare
Name:
Adress:
in sole responsibility that the product
Designation:
Series:
to which this declaration refers, complies with the essential requirements of the following European
directives by being in accordance with the specified harmonized standards:
Dir 2014/34/EU (ATEX)
EN IEC 60079‐0:2018 (IEC 60079‐0:2017, Ed. 7.0)
EN 60079‐1:2014 (IEC 60079‐1:2014, Ed. 7.0)
EN 60079‐31:2014 (IEC 60079‐31:2013, Ed. 2.0)
EN ISO/IEC 80079‐34:2020
The actuators mentioned are group II and III devices in the sense of EN IEC 60079‐0 and comply with the
therein specified device protection levels
In accordance with Directive 2014/34/EU, they meet the explosion protection requirements for Group II
equipment and the following categories
2D in type of protection dust explosion protection by enclosure "tb" for use in zone 21
The explosion protection marking for the actuators of this series is as follows
The conformity assessment with regard to Dir 2014/34/EU has been confirmed by the type examination
report IBExU22ATEX1066X / 0.
Dir 2011/65/EU
Dir 2014/30/EU
The technical documentation has been fully created.
This declaration becomes invalid if the actuator is modified in any way that has not been approved by us
or if the actuator is not used for the intended purpose.
Troisdorf
19.09.2023
ARIS Stellantriebe GmbH
www.stellantriebe.de
ExTensor
Declaration of Conformity
EC
‐
ARIS Stellantriebe GmbH
Rotter Viehtrift 9, D ‐ 53842 Troisdorf
Electric actuator
ExTensor and identical
Gb, Group II, Subgroup IIC as well as Db, Group III, Subgroup IIIC
2G in type of protection flameproof enclosure "db" for use in zone 1
EN IEC 63000:2018
EN 61000‐6‐5:2015/AC:2018‐01
II 2G Ex db IIC T6 Gb
II 2D Ex tb IIIC T80 °C Db
Ta ‐20 °C ... +60 °C
______________________________________
i.V.
R. Schulte (Quality and product
Rotter Viehtrift 9
D‐53842 Troisdorf
safety)
Telefon +49(0)2241‐25186‐0
Telefax +49(0)2241‐25186‐99
37
Need help?
Do you have a question about the ExTensor and is the answer not in the manual?