ARIS ExTensor Original Declaration Of Incorporation With Manual page 34

On-time Operating hours counter
Displays the overall operating hours of the actuator.
The operating hours counter starts as soon as the actuator is supplied with power and stops when the power supply is
cut off.
The operating hours are stored even when a power failure occurs.
A reset of the operating hours is not possible.
Cycl. count Cycle count
The cycle count counts the number of starts of the actuator in AUTO mode.
The number of starts is stored even in case of a voltage cutoff.
A reset of the counter is not possible.
Modules Modules
Displays (add-on) boards which are connected with the electronics.
Connected and recognized boards are marked with an asterisk (*) after the board name.
Example with relay board:
Board connected/recognized: > Relay*
Board not connected/not recognized: > Relay
!
Add-on boards must only be mounted/dismounted when the electronics is de-energized!
34
ADVICE
ExTensor