Technical Specifications; General Features; Input Features; Output Features (Power Device) - CD Automation REVEX PA User Manual

REVEX
PA from 35A to 90A
6

Technical Specifications

6.1 General features

Cover and Socket material:
Utilization Category:
IP Code:
Method of Connecting:
Auxiliary voltage
Order Code RXP___-_4:
Relay output for Heater Break Alarm
(only with HB option)

6.2 Input features

Digital Input:
Volt Analogic input:
Current Analogic input:
Potentiometer:
Logic input SSR (Fast Enable):

6.3 Output features (power device)

Nominal
Current Voltage range
(Ue)
(A) (V)
35 24÷600
50 24÷600
75 24÷600
90 24÷600

6.4 Environmental installation conditions

Ambient temperature
Storage temperature
Installation place
Altitude
Humidity
Pollution Level

6.5 Fan Specification

Supply: 24 Vdc
Repetitive peak
Latching
reverse voltage
current
(Uimp)
(mAeff)
(600V)
1600 600
1600 600
1600 600
1600 600
PolymericV2
AC-51 AC-55b AC-56A
20
Load in Delta, Load in Star
24Vdc 350mA 8,5W
0.5A a 24Vac/dc
4 ÷ 30Vdc 5mA Max (ON >4Vdc OFF <1Vdc) 5Hz max
0 ÷ 10Vdc impedance 15 kΩ
4 ÷ 20mA impedance 100 Ω
10 kΩ min.
4 ÷ 30Vdc 5mA Max (ON >4Vdc OFF <1Vdc)
3Hz Max duty cycle min. 100 ms
FUSE I
value
Max peak Leakage
Suggested
one cycle current
(at 500V)
(mAeff)
(10 msec.)
(A) 10msec
1900 15
1900 15
1900 15
1900 15
0-40°C (32-104°F) at nominal current. Over 40°C-104°F use
the derating curve (max 50°C).
-25°C to 70°C -13°F to 158°F
Don't install at direct sun light, where there are conductive
dust, corrosive gas, vibration or water and also in salty
environmental.
Up to 1000 meter over sea level. For higher altitude reduce
the nominal current of 2% for each 100m over 1000m
From 5 to 95% without condense and ice
Up to 2nd Level ref. IEC 60947-1 6.1.3.2
Power 7W (1 Fan)
16
User's manual
2
t
Power loss
Frequency
Thyristor +
range
A2s Fuse
(Hz)
tp= I =Inom (W)
4305 47÷70 126
4305 47÷70 180
4305 47÷70 270
4305 47÷70 324
Isolation
Voltage
(Ui)
(Vac)
3000
3000
3000
3000