A-8
Functions Supported for Unit
Versions
A-8-1
CJ2H CPU Units
Functions Supported for Unit Version 1.3 or Later
CX-Programmer version 9.1 or higher must be used to enable using the functions added for unit ver-
sion 1.3.
Function
Special instructions
for certain Special I/O
Units
New special instruc-
tions
Unit Version 1.2 or Later
CX-Programmer version 8.3 or higher must be used to enable using the functions added for unit ver-
sion 1.2.
Unit version
EM Area Force-setting/resetting
Note User programs that use functions of CJ2H CPU Units with unit version 1.2 or later cannot be used with CJ2H
CPU Units with unit version 1.1 or earlier. If an attempt is made to transfer a program that uses any of these
functions from the CX-Programmer to a CPU Unit with unit version 1.1 or earlier, an error will be displayed
and it will not be possible to download to the CPU Unit.
CJ2 CPU Unit Hardware User's Manual
Units
Models
Unit version
CJ1W-NC281/NC481/NC881
Position Control Units: PCU
HIGH-SPEED POSITIONING
(NCDMV(218))
CJ1W-NC281/NC481/NC881
Position Control Units: PCU
POSITIONING TRIGGER
(NCDTR(219))
SIGNED AREA RANGE COM-
PARE: ZCPS(088)
DOUBLE SIGNED AREA
RANGE COMPARE:
ZCPSL(116)
Unit
Model
Supported.
CJ2H CPU Units
CJ2H-CPU6@-EIP and CJ2H-CPU6@
Unit version
Unit version
1.3 or later
1.2
Supported.
Not supported. Not supported. Not supported.
Supported.
Not supported. Not supported. Not supported.
Supported.
Not supported. Not supported. Not supported.
Supported.
Not supported. Not supported. Not supported.
CJ2H CPU Units
CJ2H-CPU6
CJ2H-CPU6
Unit version 1.2 or later
Not supported.
Appendices
Unit version
Unit version
1.1
1.0
@
-EIP
@
Unit versions earlier than 1.2
A-155