Unit Versions And Programming Devices; Pull-Down List For Plc Models - Omron CJ2 CPU UNIT User Manual

Unit Versions and Programming Devices

The following tables show the relationship between unit versions and CX-Programmer versions. Refer
to A-8 Functions Supported for Unit Versions for the functions supported by each unit version.
Unit Versions and Programming Devices
CPU Unit
CJ2H CJ2H-CPU6@-EIP
Unit version 1.0
CJ2H-CPU6@-EIP
Unit version 1.1
CJ2H-CPU6@
Unit version 1.1
CJ2H-CPU6@-EIP
Unit version 1.2
CJ2H-CPU6@
Unit version 1.2
CJ2H-CPU6@-EIP
Unit version 1.3
CJ2H-CPU6@
Unit version 1.3
CJ2M CJ2M-CPU@@
Unit version 1.0
CJ2M-CPU@@
Unit version 2.0
*1 It is not necessary to upgrade the version of the CX-Programmer if functionality that was enhanced for the
upgrade of the CPU Unit will not be used.
*2 CX-Programmer version 8.2 or higher is required to use the functions added for unit version 1.1. The high-
speed interrupt function and changing the minimum cycle time setting in MONITOR mode, however, are also
supported by CX-Programmer version 8.02.
*3 A Programming Console cannot be used with a CJ2 CPU Unit.

Pull-down List for PLC Models

Unit versions are not differentiated in the pull-down list for PLC models in the Change PLC Dialog
Box of the CX-Programmer. Select as shown in the following table regardless of the unit version.
Series
CJ Series CJ2H CPU Unit
CJ2M CPU Unit
CJ2 CPU Unit Hardware User's Manual
Functions
Functions for unit version 1.0
Functions Using new
added for unit functions
version 1.1
Not using new
functions
Functions Using new
added for unit functions
version 1.1
Not using new
functions
Functions Using new
added for unit functions
version 1.2
Not using new
functions
Functions Using new
added for unit functions
version 1.2
Not using new
functions
Functions Using new
added for unit functions
version 1.3
Not using new
functions
Functions Using new
added for unit functions
version 1.3
Not using new
functions
Functions for unit version 1.0
Functions Using new
added for unit functions
version 2.0
Not using new
functions
CPU Unit Model number
CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ2M-CPU3@
CJ2M-CPU1@
Required Programming Device
CX-Programmer
Ver. 7.1 Ver. 8.2
Ver. 8.0 Ver. 9.0
or lower or higher
--- OK OK OK
--- --- *2 OK
OK
--- *1 OK OK
OK
--- --- *2 OK
OK
--- --- OK OK
--- --- --- OK
--- *1 *1 OK
OK OK
--- --- --- OK
--- *1 *1 OK
OK OK
--- --- --- ---
--- *1 *1 OK
OK OK
--- --- --- ---
--- *1 *1 OK
OK OK
--- --- --- ---
--- --- --- ---
--- --- --- ---
PLC model in Change PLC Dialog Box in CX-Programmer ver-
sion 9.0 or higher
CJ2H
CJ2M
Program-
ming
Ver. 9.12
Ver. 9.1
Console
or higher
OK OK
*3
---
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
--- OK
OK
*1
OK
33