Connecting To Ethernet (Cj2H-Cpu6@-Eip And Cj2M-Cpu3@ Only) - Omron CJ2 CPU UNIT User Manual

4-2-3 Connecting to Ethernet (CJ2H-CPU6@-EIP and CJ2M-CPU3@
Only)
Connection Method
With the CJ2H-CPU6@-EIP or CJ2M-CPU3@, use a commercially available Ethernet 100Base-TX STP
twisted-pair cable (straight) to connect the CX-One Support Software (e.g., CX-Programmer) to the
built-in EtherNet/IP port through the Ethernet switch. With the CJ2H-CPU6@-EIP, Ethernet twisted-pair
cable can also be used to connect to a personal computer. The same type of connection can be made
with the CJ2H-CPU6@ or CJ2M-CPU1@ through an EtherNet/IP Unit.
Connecting Cable
Use the following cable to connect the CJ2 CPU Unit to the computer running the Support Software.
Port at Unit
Built-in Ether- Ethernet
Net/IP port port
*1 Use 100Base-TX when using tag data links.
*2 The following table shows the devices recommended for use with the built-in EtherNet/IP port.
Part
Ethernet switch
Twisted-pair cable
Connectors
(Modular plug)
Boots
CJ2 CPU Unit Hardware User's Manual
100Base-TX
twisted-pair cable
(straight)
Ethernet switch
Port at Network type (commu-
computer nications mode)
100Base-TX or 10Base-
*1
T
Manufacturer
OMRON W4S1-03B
W4S1-05B
W4S1-05C
Cisco Systems, Inc. Consult the manufacturer.
Contec USA, Inc. Consult the manufacturer.
Phoenix Contact Consult the manufacturer.
100Base-TX
Fujikura
F-LINK-E 0.5mm
EtherNet/IP compliant cable
STP Plug
Panduit Corporation MPS588
Tsuko Company MK boot (IV) LV
CX-One (e.g., CX-Programmer)
Built-in EtherNet/IP port
100Base-TX
twisted-pair cable
(straight)
Model
Commercially available
*2
twisted-pair cable
Commercially available
*2, *3
Ethernet switch
Model number
---
Cisco Systems, Inc. Main Corporate HQ
CONTEC USA Inc.
Phoenix Contact USA Customer Service
×
Fujikura America, Inc.
4P
---
Panduit Corporation US Headquarters
Tsuko Company Japan Headquarters
4 Support Software
CJ2 CPU Unit
Length Remarks
100 m (Recommended ---
between Ethernet
switch and nodes.)
---
Inquires
4
4-9