Setting The Unit To Call The Pager - Panasonic KX-T4550-B Operating Instructions Manual

To confirm the stored number
Press a> =p ($) = the memory number (0) to (4).
e The unit dials the stored number.
o lf the pager does not beep, restart from step 1 to store the correct number.
To erase the stored number
Press (PROGRAM/2WAY REC) =» (SCREEN/PLAYBACK) => (#) =>
the memory number (0) to (4) =» (PROGRAM/2WAY REC).
Setting the Unit to Call the Pager
Turn on the pager call mode in common memory or each mailbox.
Make sure that the pager number has been stored.
In common memory:
Press [PAGER CALL) to tum on the pager
call mode.
e The indicator lights.
e lf 6 beeps sound, the pager number is
not stored. Store the number, then try
again.
In mailbox memory:
Press the desired mailbox button (1, 2, 3,
or 4),
PERSONAL MAILBOX =
‚O
2O :0 ¿O
A dr A
fi Ny Gal FAL,
Press (PAGER CALL) to turn on the pager
call mode.
e The indicator lights.
¢ If 6 beeps sound, the pager number is
not stored. Store the number, then try
again.
e To turn off the pager call mode, press (PAGER CALL) again in each
memory. The indicator light goes out.
43