Page 1: Table Of Contents
Base Unit Settings ...57 Multi-Unit User Operations...62 Walkie-Talkie ...69 Answering System Answering System ...72 Useful Information Using the Belt Clip ...84 Optional Headset ...84 Wall Mounting ...85 Before Requesting Help...86 Character Table ...89 Index ...91 Technical Information...92 Guarantee ...93 KX-TCD515E...
Page 2: Before Initial Use
Before Initial Use Features Digital Answering System Up to 30 minutes recording time, with time/day stamp that records when messages were received and counts the total number. SMS (Short Message Service) compatibility Now the convenience of sending and receiving text messages is available from a home telephone.
Page 3 Dear purchaser, You have acquired a KX-TCD515E, which is a product made in accordance with the Digital Enhanced Cordless Telecommunications (DECT). DECT technology is characterized by high-security protection against interceptions as well as high-quality digital transmission.
Page 4 Before Initial Use Accessories (specific to product type) AC Adaptor Order No. PQLV19EZ (PQLV19E) Belt Clip Order No. PQKE10355Z1 (Metallic Grey) PQKE10355Z2 (Violet) Telephone Line Cord Order No. PQJA87S (for UK) Battery Cover Order No. PQKK10134Y6 (Metallic Grey) PQKK10134Y7 (Violet) Rechargeable Batteries (AAA size) Order No.
Page 5: Important Information
Only use the power supply included with the product. Do not connect the AC Adaptor to any AC outlet other than the standard AC220-240 V. The apparatus is approved for use with PQLV19E (Order No. PQLV19EZ) power supply. This apparatus is unable to make calls under the following conditions: •...
Page 6: Location Of Controls
Location of Controls Handset Ringer/Charge Headset Socket Charge Contact How to Use the Handset Soft Keys Rear side Speaker Receiver Display Charge Contact Microphone 3 soft keys are used to select functions displayed directly above the keys. Functions displayed above the keys will change depending on the state of use.
Page 7: Meanings Of Icons Above Soft Keys
Base Unit Meanings of Icons above SOFT KEYS Icon Function Go Back Menu Sub-Menu Redial Phonebook New Phonebook Search Key Lock 12/24 Hour Clock Stop No Function Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 Location of Controls PAGE Button Icon Function LetterWise...
Page 8: Meanings Of Symbols And Operations Of Keys
Meanings of Symbols and Operations of Keys Symbol Move JOYSTICK up, down, left or right. e.g., Search the main menu. e.g., Display of menu items e.g., OK e.g., Standby Mode Display e.g., Redial e.g., Display of menu items e.g., Go Back Press POWER/TALK OFF Button.
Page 9: Display
Display Icons IN USE H/set 1 Main Menu Display To go to the Main Menu, press JOYSTICK while in the standby mode display. The selected menu icon is turned over, and its title is displayed. Example: “Caller ID” is selected. Caller ID Helpline Tel.No.
Page 10: Setting Up
(It is normal for the adaptor to feel warm during use). • Never install telephone wiring during a lightning storm. • USE ONLY WITH Panasonic AC ADAPTOR PQLV19E (Order No. PQLV19EZ). Battery Installation Please ensure the batteries are inserted as shown.
Page 11 Battery Information After your Panasonic battery is fully charged: Ni-MH Batteries (typical 700 mAh) Operation Operating Time While in use (TALK) 10 hrs approx. While not in use 120 hrs approx. (Standby) Ni-Cd Batteries (typical 250 mAh) Operation Operating Time While in use (TALK) 4 hrs approx.
Page 12: Selecting The Display Language
Setting up Power ON/OFF Power ON Press and hold When POWER is POWER. released, the display changes to the standby mode. Selecting the Display Language You can select one of 19 languages. The factory preset is English. To exit the operation, press Press JOYSTICK (or move).
Page 13: Setting The Date And Time
Setting the Date and Time After a mains power failure, the clock needs to be adjusted. Ensure that the not flashing. To exit the operation, press Press JOYSTICK (or move). Enter the date (see below). Example: To set 16 February, 2003, 7:15 pm. Date Month To select 12/24 hour clock...
Page 14: Using The Telephone
Using the Telephone Making a Call Pre-Dialling Enter Phone Number. • If you need to make a correction while entering the phone number when using Pre- Dialling, press . The digit is cleared to the left, then you can enter numbers. All digits are cleared if you press and hold •...
Page 15: Digital Speakerphone
Receiver (or Headset Receiver)/Speaker Volume The choices for the receiver (or headset receiver) volume are 3 levels, and 6 levels for the speakerphone volume. To increase volume, move the JOYSTICK up. To decrease volume, move the JOYSTICK down. (During a call) Have a Hands-Free Phone Conversation (using Digital Speakerphone) Hands-free allows you to talk to your caller without holding the handset and allows other...
Page 16: Key Lock
Using the Telephone Key Lock You can lock the handset dialling buttons. Only incoming calls are accepted while the key lock is ON. When the key lock is ON, the menu icon When the key lock is ON, emergency calls (p.59) cannot be made until key lock is cancelled.
Page 17: Recall Feature
Redialling The last 10 numbers dialled are automatically stored in the redial list. Dialling with the Redial List Press RIGHT SOFT KEY. • If there is no item stored in the redial list when pressing “Memory Empty”. • If the items are scrolled at the end when you search for the desired dialled item, an end tone sounds.
Page 18: Call Waiting
Using the Telephone Dialling Pause (for PBX line/long distance service users) A dialling pause is used when a pause in the dialling of a phone number is necessary using a PBX or accessing a long distance service. For example, when 0 (line access number) is dialled followed by a pause to access an outside line through a PBX: Press 0.
Page 19: Caller Id
Caller ID Service Caller ID is a service of your Network provider and will only operate if you have subscribed to this service. After subscribing to Caller ID, this phone will display the caller information. If your unit is connected to a PBX or a telephone line that does not support this service, you will not be able to use it.
Page 20: List Menu
List Menu Caller ID List Menu You can save the numbers from the Caller ID list into the Phonebook, and you can edit (for calling) or delete item(s) in the Caller ID List. To exit the operation, press Press JOYSTICK (or move).
Page 21 Deleting One/All Caller ID Item(s) Follow steps 1 to 3 on the previous page, then: Select “Delete” or “Delete All”. Redial List Menu You can save the numbers from the redial list into the Phonebook, and you can edit (for calling) or delete item(s) in the redial list.
Page 22 List Menu Editing the Dialled Number for Calling Follow steps 1 and 2 on the previous page, then: Select “Edit for Call”. • You can also press Deleting One/All Redial Item(s) Follow steps 1 and 2 on the previous page, then: Select “Delete”...
Page 23: Using The Phonebook
You can store up to 200 caller information in the handset phonebook and up to 20 caller information in the base unit phonebook. If you subscribed to Caller ID and you received a call from the same phone number you stored with name in the phonebook, the display will show the caller’s name.
Page 24 Using the Phonebook Storing Caller Information To exit the operation, press Handset Phonebook Press LEFT SOFT KEY. Select “H/set Phonebook”, then the display shows the number of empty phonebook entries. Enter Phone Number. (max. 24 digits) Select “Save”, then “Saved” is displayed. •...
Page 25 Base Unit Phonebook To use an Audible Caller ID feature (p.23), you must store caller information into the base unit phonebook. Follow steps 1 and 2 on the previous page, then: Select “Base Phonebook”, then the display shows the number of empty phonebook entries.
Page 26 Using the Phonebook Entering Names/Characters Keys Move the JOYSTICK up, down, left or right to move the cursor. Press to enter letters/numbers. (Items are added to the left of the cursor. If the cursor is at the beginning of a line, the item is added at the beginning.) Press to delete characters.
Page 27 Finding Items in the Phonebook All phonebook items are stored in the following order: Alphabet letter/Symbol/Number/ Telephone Number (when a name is not stored). To exit the operation, press Press LEFT SOFT KEY. • When finding items in the Base Unit phonebook , press Searching for a Name by Initial Example: To find “Felix”...
Page 28 Using the Phonebook Searching by Index Search Mode Example: To find “ΣΟΦΙΑ” (SOPHIA). Press LEFT SOFT KEY. Press RIGHT SOFT KEY repeatedly until the desired input mode (Greek) appears. • When finding items in the Base Unit phonebook , press Dialling from the Phonebook Press LEFT SOFT KEY.
Page 29 Deleting Caller Information To exit the operation, press Press LEFT SOFT KEY. Select “Yes”, then “Deleted” is displayed. • When finding items in the Base Unit phonebook , press • To continue deleting other caller information, repeat from step 2. •...
Page 30 Using the Phonebook Hot Keys You can assign the dialling buttons phone numbers from the phonebook. To exit the operation, press Registering a Phone Number as a Hot Key Press LEFT SOFT KEY. Select the desired dialling button number. • If there is no item stored in the phonebook when searching for the desired item, the display shows “Memory Empty”.
Page 31: Sms Feature (Text Message)
You can send and receive text messages between other fixed and mobile phones that also support a compatible SMS feature and network. The SMS feature is only available after subscribing to Caller ID. Before sending your first text message, or to find out more information on SMS conditions and registration, please read your SMS Conditions (Text Messaging) for Bizzyline (Direct) Ltd.
Page 32 SMS Feature (Text Message) Writing and Sending New Messages To exit the operation, press Press JOYSTICK (or move). Enter Message. (p.34) Entering a Number Manually Follow steps 1 to 5 shown above, then: Enter Phone Number. (max. 20 digits) Entering a Number from the Phonebook Follow steps 1 to 5 shown above, then: Press LEFT SOFT KEY.
Page 33 Entering a Number from the Caller ID List Follow steps 1 to 5 on the previous page, then: Select the desired item. Entering a Number from the Redial List Follow steps 1 to 5 on the previous page, then: Press RIGHT SOFT KEY.
Page 34 SMS Feature (Text Message) Text Entry Keys Move JOYSTICK up, down, left or right to move the cursor. Press to enter letters/numbers. (Items are added to the left of the cursor. If the cursor is at the beginning of a line, the item is added at the beginning.) Press to delete characters.
Page 35 Entering Text in LetterWise ® LetterWise is the default input mode. LetterWise This system suggests to the user the most likely letter to follow the text entered previously. Enter letters by pressing If the letter displayed is not correct, change the letter by pressing times).
Page 36 SMS Feature (Text Message) Reading/Displaying a Message in the Outgoing List You can display messages saved in date/time order. To exit the operation, press Reading/Displaying a message Press JOYSTICK (or move). Select the desired message. Sending a message Follow steps 1 to 6 shown above, then: Select “Send”.
Page 37 Receiving a Text Message When a message has been received, the display will show the following and a tone will sound. The number indicates how many mails were received. When the SMS message memory is full, “Full” is displayed. No messages can be received if the memory is full. Helpline Tel.No.
Page 38 SMS Feature (Text Message) Reading/Displaying a Message in the Incoming List To exit the operation, press Press JOYSTICK (or move). Select “Receive List”. Move the JOYSTICK down. • The most recent sender’s details are displayed. • If the name and number have been stored in the phonebook, the name is also displayed.
Page 39 Replying to a message Follow steps 1 to 6 on the previous page, then: Press JOYSTICK. Press JOYSTICK twice. twice • “Sending Message” is displayed. The display returns to the standby mode, then “Transferring Message” is displayed. • If the base unit does not have sufficient memory to send a message, the display will show “SMS lists are memory full.
Page 40 SMS Feature (Text Message) Editing a message Follow steps 1 to 6 on page 38, then: Press JOYSTICK. Storing the Sender’s Phone Number in the Phonebook Follow steps 1 to 6 on page 38, then: Press JOYSTICK. Editing the sender’s Phone Number for Call Follow steps 1 to 6 on page 38, then: Press JOYSTICK.
Page 41 Changing the SMS Message Centre Numbers To send and receive SMS text messages, you need your SMS Message Centre telephone numbers. Two numbers have been preset in your phone. The phone number for SMS Message Centre 1 is used to SEND text messages while the number for Message Centre 2 is used to RECEIVE text messages.
Page 42 SMS Feature (Text Message) Setting the PBX Line Access Number This feature is only for the phones connected to a PBX. This allows you to delete automatically the PBX line access number (max. 4 digits) when you enter the destination phone number of an SMS outgoing message from Phonebook, Redial or Caller ID lists.
Page 43: Settings Menu Chart
Handset Settings Menu Chart 1st Menu Setting Handset Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 Settings Menu Chart 2nd Menu Set Date/Time Memo Alarm Ringer Option Tone Option Display Option Call Option Registration Select Base Other Option 3rd Menu Ringer Volume EXT Ringer Type INT Ringer Type...
Page 44 Settings Menu Chart Base Unit Settings Menu Chart 1st Menu Setting Base 2nd Menu Ringer Option Call Option Cancel Handset Other Option 3rd Menu Ringer Volume Recall Pause Time Emergency Call Call Restricted Change Base PIN Reset Base...
Page 45: Handset Settings
Memo Alarm Set the date and time before setting the memo alarm (see page 13). To exit the operation, press Press JOYSTICK (or move). Select “Memo Alarm”. Setting the Alarm Mode “Once” or “Daily” Follow steps 1 to 4 shown above, then: Select “Once”...
Page 46 Handset Settings Setting the Alarm “Off” Follow steps 1 to 4 on the previous page, then: Select “Off”. • The factory preset is “Off”. • To delete the displayed memo alarm, press To Stop the Alarm (The Alarm sounds: Max. 3 minutes) •...
Page 47: Ringer Options
Ringer Options There are 15 ringer patterns available on each ringer. “Ringer 1” to “Ringer 6” are the bell ringer patterns. “Ringer 7” to “Ringer 15” are the preset melody patterns as below. The music data in this product belongs to M-ZoNE Co., Ltd. To exit the operation, press Ringer No.
Page 48 Handset Settings Setting the Ringer Volume The choices are 6 levels and off. If you set the volume to OFF, “ however, still the volume of a paging and intercom call are level 1. Press JOYSTICK (or move). Select “Ringer Volume”...
Page 49: Display Options
Setting the Handset Key Tone ON/OFF You can turn the key tone on/off. To exit the operation, press Press JOYSTICK (or move). Press JOYSTICK to select “Key Tone”. • The factory preset is “On”. Display Options To exit the operation, press Press JOYSTICK (or move).
Page 50 Handset Settings Selecting the Talk Mode Display Follow steps 1 to 3 of Display Options on the previous page, then: Select “Talk Display”. • Even if you select “Phone Number”, the length of the call will appear on your display when you receive calls.
Page 51: Call Options
Call Options To exit the operation, press Press JOYSTICK (or move). Call Bar On/Off When this feature is set to ON, outgoing calls cannot be made. Intercom calls and calls to numbers assigned as emergency numbers can be made (see Setting the Emergency Calls on page 59).
Page 52 Handset Settings Setting the Direct Call ON/OFF Follow steps 1 to 3 on the previous page, then: Select “Direct On/Off”. • If the direct call mode is turned off, “ • If you did not set the Direct Call Number, “Enter Phone No” will be displayed. Enter the number then press Select “On”...
Page 53: Other Options
The factory preset is 0000. Once you have programmed the handset PIN, you cannot confirm it. We recommend you write down the handset PIN. If you forget it, please consult our Panasonic Customer Care Helpline. U.K. 08700 100 076 R.O.I. 01289 8333 Follow steps 1 to 3 shown above, then: Select “Change H/S PIN”.
Page 54 Handset Settings Changing Handset Name Follow steps 1 to 3 on the previous page, then: Select “Change H/S Name”. Setting Auto Talk ON/OFF Follow steps 1 to 3 on the previous page, then: Select “Auto Talk”. • The factory preset is “Off”. Changing the LetterWise Follow steps 1 to 3 on the previous page, then: Select “LetterWise”.
Page 55 Reset the Handset Settings You can reset all of the handset settings to their initial settings. Press JOYSTICK (or move). Select “Reset Handset”. Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 Select “ Setting Handset”. Enter 4-digit Handset PIN. (Factory Preset 0000) Handset Settings Select “Other Option”.
Page 56 Handset Settings Handset Initial Settings Functions Memo Alarm Mode Alarm Time Handset Ringer Volume Handset External Ringer Pattern Handset Internal Ringer Pattern Handset Paging Tone Pattern Handset Private Ringer Pattern Handset Alarm Tone Pattern Key Tone Standby Mode Display Talk Mode Display Display Language Call Bar Mode Direct Call Mode...
Page 57: Base Unit Settings
Setting the Base Unit Ringer Volume To exit the operation, press Press JOYSTICK (or move). Select “Ringer Option”. To increase volume, move the JOYSTICK To decrease volume or set to OFF, move the JOYSTICK down. (3 levels) • The factory preset is medium. Helpline Tel.No.
Page 58 An earth relay can be installed as an option depending on your PBX requirements. Please consult our Panasonic Customer Care Helpline for installation. On installation, you can then select the flash or earth mode to suit your PBX or network provider.
Page 59 Setting the Emergency Calls Even if handset is in Call Bar Mode, you can make an emergency call. Follow steps 1 to 4 on the previous page, then: Select “Emergency Call”. Enter Emergency Call Number. • The factory presets are 112 and 999. Call Restriction You can restrict selected handset(s) from dialling selected phone numbers.
Page 60 The factory preset is 0000. Once you have programmed the base unit PIN, you cannot confirm it. We recommend you write down the base unit PIN. If you forget it, please consult our Panasonic Customer Care Helpline. U.K. 08700 100 076 R.O.I. 01289 8333 Follow steps 1 to 4 shown above, then: Select “Change Base...
Page 61 Base Unit Initial Settings Function Recall Pause Timing Emergency Call Number 1 Emergency Call Number 2 Call Restricted Handset(s) Call Restriction Number(s) 4-Digit Base Unit PIN Base Unit Ringer Volume SMS Message Centre Number 1 SMS Message Centre Number 2 Caller ID List SMS Message Lists SMS PBX Line Access Number Support ON/OFF...
Page 62: Multi-Unit User Operations
Multi-Unit User Operations Operating Additional Handsets Additional KX-TCA151E handsets are available for purchase separately. Up to 6 handsets can be registered to a single base unit. Using additional handsets allows you to have an intercom call while simultaneously conducting a call to an outside line. Operating Additional Base Units You can register and operate your handset with up to 4 base units.
Page 63 Handset Registration to a Base Unit The handset supplied with the base unit is already registered. If an optional handset is purchased, it must be registered as follows. Charge the optional handset batteries for 7 hours before initial use. Handset registration must be completed within 1 minute after pressing the If over 1 minute, press To exit the operation, press Press JOYSTICK...
Page 64 Multi-Unit User Operations Cancelling a Handset Each handset can cancel itself or another handset. This feature is usually used to cancel a link between Handset and Base Unit. To exit the operation, press Press JOYSTICK (or move). Enter 4-digit Base Unit PIN. (Factory Preset 0000) Search and press RIGHT SOFT KEY to...
Page 65: Intercom Between Handsets
Base Unit Selection When “Auto” (Automatic Base Unit Selection) is selected, the handset automatically searches for other registered base units if you move outside of the radio cell of the current base unit. When a specified base unit is selected, the handset will access that base unit only. Calls (both incoming and outgoing) can be conducted only via the selected base unit, even if the radio cells overlap with neighbouring base units.
Page 66 Multi-Unit User Operations Transferring a Call to Another Handset The intercom can be used during a call to transfer an external call between handsets that are registered to the same base unit. To exit the operation, press For example, when Handset 1 transfers a call to Handset 2: <Handset 1>...
Page 67: Phonebook Copy
Phonebook Copy You can copy phonebook information between handsets registered to the same base unit. The phonebook copy must be performed while in intercom mode (see Intercom Between Handsets on page 65). To exit the operation, press Copying an Item <Handset 1: Receiver>...
Page 68 Multi-Unit User Operations Copying All Items To exit the operation, press Follow steps 1 to 4 on the previous page, then: <Handset 1: Receiver> • When copying is completed, a beep sounds and “Copy Complete” is displayed. After a few seconds, the display will return to the intercom call. “Copy Incomplete” will be displayed if the receiver handset memory is full.
Page 69: Walkie-Talkie
The Walkie-Talkie feature allows handsets to communicate with each other outside the range of the base unit. When the handsets are in Walkie-Talkie mode, external calls cannot be received. Only KX-TCA151E with Walkie-Talkie feature can communicate with one another. Talk time in this mode is approximately 6 hours. Standby time in this mode is approximately max.
Page 70 Walkie-Talkie To exit the operation, press Press JOYSTICK (or move). Select “Setting”. When “Group” was selected; Enter 3-digit Group Code. (Factory Preset 000) Enter Handset Number. (1-9: Factory Preset is 1) • If you select “Group”, enter Group Code (this can be 3 digits of your choice - the factory preset is 000).
Page 71 To Turn the Walkie-Talkie Mode On/Off To use the Walkie-Talkie feature, all handsets in conversation must be in Walkie-Talkie mode. To exit the operation, press To Turn the Walkie-Talkie Mode On Press JOYSTICK (or move). • When the Walkie-Talkie mode is ON, the handset number is displayed after “Walkie-Talkie”...
Page 72: Answering System
Answering System If you set the current date and time (p.13) and set the answering system ON, a synthesized voice announce the date and time an/a incoming/memo message was recorded after playback-Voice Date/Time Stamp. The total recording capacity is approximately 30 minutes or 64 messages. Any recorded noise may shorten the recording time up to 3 minutes.
Page 73: Greeting Message
Greeting Message Recording Your Own Greeting Message Press JOYSTICK (or move). Select “Record OGM”. Selecting the Caller’s Recording Time Follow steps 1 to 2 shown above, then: Select “Setting TAM”. • The factory preset is “No Limit”. Answering System Select “ Operation”.
Page 74 Answering System Playing back a Pre-Recorded Greeting Message If you do not record your own greeting message, one of two pre-recorded messages will be played. A pre-recorded greeting message depends on the selecting of same phone caller's recording time. When the recording time is set to “1 Minute” or “No Limit” (30 minutes). - “Hello, we are not available now.
Page 75: Selecting The Number Of Rings
Selecting the Number of Rings You can select the number of times the unit rings before the answering system answers a call, from 2 to 7 or Auto (for Toll Saver; as below). Toll Saver (When set to “ Auto ”) When you call the unit from a touch tone telephone: If the unit answers on the 2nd or 3rd ring, there is at least one new message.
Page 76 Answering System Incoming/Memo Messages Incoming messages and memo messages are stored in chronological order. New messages cannot be recorded when “Full” is displayed. We recommend you erase unnecessary messages after each playback to leave more time for recording new message(s). H/set 1 1 Messages 17.8 14:59...
Page 77 Stopping a Message During Playback (During Playing Message) Selecting the Receiver Volume During Playback (During Playing Message) Clearing One Incoming/Memo Message (During Playing Message) Select “Yes”, then “Deleted” is displayed. • You can also delete the message by pressing Clearing All Incoming/Memo Messages Press JOYSTICK.
Page 78 Answering System Editing a Number for Call (During Playing Message) Edit Phone Number. Monitor Function ON/OFF When your greeting message is being played to the caller and the caller's message is being recorded, you can listen to it through the handset. Press JOYSTICK (or move).
Page 79 Answering System Direct Command You can operate the answerring system by pressing dialling button as direct command. Press JOYSTICK (or move). Follow steps 1 to 3 shown above, then: Press Press Press Press Press Follow steps 1 to 2 shown above, then: Press Press Press...
Page 80: Remote Operation From A Touch Tone Phone
Answering System Remote Operation from a Touch Tone Phone You can operate the answering system from any touch tone phone. Firstly you must store your remote code using the handset near the base unit. The 3-digit remote code prevents unauthorised use of your answering system for listening to recorded messages.
Page 81 Summary of Remote Operation You can operate the answering system from any touch tone phone. Call from a touch tone phone. Number of new message is played. Direct Remote Commands After entering the remote code, you can choose to operate your answering system using direct commands as below, in place of listening to the voice menu.
Page 82: Voice Menu
Answering System Voice Menu The words in “ ” means a voice guidance. Press “Press 1 to playback all messages. Press 2 for other functions.” Press “Press 1 to playback new messages. Press Press 2 for other functions.” “Press 1 to record your message. Press 2 for other functions.”...
Page 83: Recording A Memo Message
Recording a Memo Message Press JOYSTICK (or move). Select “Record Memo”. Recording Your Telephone Conversation When you record your 2-way telephone conversation, you should inform the other party that the conversation is being recorded. During recording, a beep will sound approximately every 15 seconds. (During a call) Select “...
Page 84: Using The Belt Clip
Optional Headset Plugging an optional headset into the handset allows hands-free phone conversations. Please use only the Panasonic KX-TCA89EX headset. To order, call the accessories telephone number on page 3. While using the headset, speakerphone is not available. To switch to speakerphone, disconnect the headset.
Page 85: Wall Mounting
This unit can be mounted on a wall. - Insert screws into the wall. The centre of the screw holes should be 8 cm horizontally apart. - Make sure the screws are securely fastened to the wall. - Connect the AC adaptor and the telephone line cord. - Arrange the wires as shown, then mount the unit.
Page 86: Before Requesting Help
Before Requesting Help If you experience any problems with the normal use of your apparatus, you should unplug it from the telephone outlet and connect a known working telephone in its place. If the known working telephone still has problems, then please contact the customer service department of your Network provider.
Page 87 Delete unused base registrations from handset. • Delete unused handset registrations from base. • If PIN number is lost, contact the Panasonic Customer Care Helpline. • Move base/handset away from sources of electrical noise (e.g. TVs, radios, etc.). • Turn the SMS feature off, if you do not use an SMS service.
Page 88 Before Requesting Help Answering System Problem You cannot operate the answering system with the handset. While recording a greeting message, the unit starts to ring and stops recording. During playback, the unit starts to ring and stops playback. SMS-Text Messaging Problem Cannot send a message.
Page 89: Character Table
Character Table Phonebook Character Table Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333...
Page 90 Character Table SMS Character Table “LetterWise®” Character Table Buttons Character Space . @ / : ; Displayed + - 1 " ’ , ! ¡ ? ¿ _ € £ $ ¥ () [ ] { } & % \ ^ ~ | <...
Page 91: Index
AC Adaptor ... 4, 10 Accessories... 4 Answering a Call ... 14 Answering System ... 72 Any Key Talk ... 14 Audible Caller ID ... 23 Auto Talk ... 14, 54 Base Unit Initial Settings... 61 PIN ... 60 Reset... 60 Selection ...
Page 92: Technical Information
Connections: The telephone will not work during a power failure. We therefore recommend you use a standard telephone and T Adaptor to connect this Digital Cordless Phone to the line. Your Panasonic Sales Shop can offer you more information about connection possibilities.
Page 93: Guarantee
8. The guarantee period applicable to this product shall be 12 months. Please keep these Operating Instructions with your receipt. Panasonic Business Systems U.K. Receipt No. Model No. KX-TCD515E Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333...
Page 96 Hereby, Panasonic Communications Co., Ltd., declares that this Dect Cordless Telephone is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the manufacturer's declaration of conformity to the essential requirements of the R&TTE Directive is available at the following web address: http://doc.panasonic-tc.de...

Panasonic KX-TCD515E Operating Instructions Manual

Quick Links

Related Manuals for Panasonic KX-TCD515E

Summary of Contents for Panasonic KX-TCD515E

Table of Contents