Table of Contents
Advertisement
50
[=> Remote Operation from a Touch Tone
Phone
Direct Remote Operation
Once you have entered the remote code or mailbox password, you can also
control your unit by direct remote command instead of using the voice menu.
To end the remote operation, hang up anytime.
List of the direct command
NEW MESSAGE
plore
ALL MESSAGE
Li
REPEAT
(During playback)
SKIP
(During playback)
STOP
(During playback)
GREETING
MESSAGE
RECORDING
>
RECORD
y
ERASE SPECIFIC
MESSAGE
(During playback)
ERASE ALL
MESSAGE
e Only new messages are played back.
o All the messages are played back.
o The current message is repeated.
o The current message is skipped.
The next message is played.
o Playback is stopped temporarily.
e To resume playback, press (9) again
within 15 seconds. Or the voice menu
will start.
o A long beep sounds.
oe Speak immediately after the long beep.
o Recording is stopped.
o The recorded message is played.
o The current message is erased.
o A series of beeps sounds and the next
message is played.
o All the recorded messages in the
selected memory are erased,
o A series of beeps and "No message" are
heard.
Advertisement
Table of Contents
