Table of Contents
Advertisement
42
Pager Call
The feature allows you to alert your pager when the unit records an incoming
message. Then you can retrieve the message from a touch tone telephone
(p. 44). First store the pager number, then turn on the pager call mode.
Storing the Pager Number
Store the pager's number in common memory or each mailbox.
The TALK and/or SP-PHONE indicator light must be off.
(PROGRAM/2WAY
REC].
| Press (PROGRAM/2WAY REC
o The BATT LOW/PROG
and Indicator
indicator lights.
BATT LOW/
©) Press (SEREENPLAYBACK).
PROG
Indicator
o The indicator fights.
3 Press (+), then (0) through (4) to
select the memory.
(0: Common memory, 1-4: Mailbox)
PROGRAM/2WAY REC
å Enter your pager number up to 30 digits.
i
REDIAL/PAUSE
o If necessary, press [REDIAL/PAUSE)
twice.*
o If you misdial, press (PROGRAM/2WAY REC
then restart from step 1.
5 Enter the call back number you want to display on your pager.
(Press # if required by your pager company.)
6 When finished, press [PROGRAM/2WAY REC].
o The indicator lights go out.
*Y our pager company may require a delay after the pager number is dialed.
Contact the pager company regarding the pause time needed.
Each time you press (REDIAL/PAUSE), it creates a 3.5-second delay.
Advertisement
Table of Contents
