Setting The Cpc (Calling Party Control) Function; Setting The Greeting Monitor Function - Panasonic KX-T4550-B Operating Instructions Manual

20
=> Programmable Preparations
Setting the CPC (Calling Party Control) Function
The CPC function is preset to "A". If you use a call waiting service, set to "b",
or the call waiting tone will disconnect someone leaving a message.
1.
2.
Press [PROGRAM/2WAY REC).
Press [SCREEN/PLAYBACK)].
. Press (3).
e The current setting "A" or "b" is displayed on the base unit.
. To select "b", press (2).
OR
To select "A", press (1).
o The setting is displayed.
. When finished, press [PROGRAM/2WAY REC].
Setting the Greeting Monitor Function
When your greeting message is being played to the caller, you can also
listen to it through the speaker. To listen, set to "2 (ONY. The factory preset
is "1 (OFP).
1,
2.
Press |[PROGRAM/2WAY REC).
Press |SCREEN/PLAYBACK)].
. Press (4).
o The current setting "1" or "2" is displayed on the base unit.
. To set to "2 (ON), press (2).
OR
To set to "1 (OFF)", press (1).
o The setting is displayed.
. When finished, press (PROGRAM/2WAY REC}.