Technical Specifications - Siemens SIMATIC ET 200SP Equipment Manual

Technical specifications

Technical specifications of F-DQ 8x24VDC/0.5A PP HF
The table below shows the technical specifications as of 12/2022. A data sheet with technical
specifications updated on a daily basis can be found on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7136-6DC00-0CA0/td?dl=en).
Article number
General information
Product type designation
Firmware version
•
usable BaseUnits
Color code for module-specific color identification
plate
Product function
•
Engineering with
•
•
•
Supply voltage
Rated value (DC)
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Reverse polarity protection
power supply according to NEC Class 2 required
Input current
Current consumption (rated value)
Current consumption, max.
output voltage / header
Rated value (DC)
Power
Power available from the backplane bus
Power loss
Power loss, typ.
Address area
Address space per module
•
•
54
FW update possible
I&M data
STEP 7 TIA Portal configurable/integrated from
version
STEP 7 configurable/integrated from version
PROFINET from GSD version/GSD revision
Inputs
Outputs
6ES7136-6DC00-0CA0
F-DQ 8x24 V DC/0.5 A PP HF
Yes
BU type A0
CC02
Yes; I&M0 to I&M3
V14 SP1 with HSP 202
V5.5 SP4 HF5
V2.31
24 V
19.2 V
28.8 V
Yes
No
75 mA; without load
21 mA; From the backplane bus
24 V
70 mW
3 W
6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA
6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA
Digital output module F-DQ 8x24VDC/0.5A PP HF (6ES7136-6DC00-0CA0)
Equipment Manual, 12/2022, A5E38578424-AB
7