Connecting; Wiring And Block Diagram - Siemens SIMATIC ET 200SP Equipment Manual

Connecting

3.1

Wiring and block diagram

This section provides the block diagram of the F-DQ 8×24VDC/0.5A PP HF F-module with the
terminal assignment.
You can find information about the various connection options and their configuration in the
section Applications of the F-I/O module (Page 32) or Parameters/address space (Page 19).
You can find more information about wiring the BaseUnit in the ET 200SP Distributed I/O
System (https://support.industry.siemens.com/cs/ww/en/view/58649293) system manual.
Note
The load group of the F-module must begin with a light-colored BaseUnit. Keep this in mind
as well during configuration.
Note
Make sure that you only use the digital output module with BaseUnit type A0 during
commissioning.
Digital output module F-DQ 8x24VDC/0.5A PP HF (6ES7136-6DC00-0CA0)
Equipment Manual, 12/2022, A5E38578424-AB
3
17