Parameters/Address Space; Parameters - Siemens SIMATIC ET 200SP Equipment Manual

Parameters/address space

4.1

Parameters

Parameters for F-DQ 8x24VDC/0.5A PP HF
Diagnostics functions should be activated or deactivated in accordance with the application,
see section Applications of the F-I/O module (Page 32).
The following parameters are possible:
Table 4- 1 Configurable parameters
Parameters
F-parameters:
Manual assignment of F-
monitoring time
F-monitoring time
F-source address
F-destination address
F-parameter signature (with-
out addresses)
Behavior after channel faults
Reintegration after channel
fault
F-I/O DB manual number
assignment
F-I/O DB number
F-I/O DB name
DQ parameters:
Digital output module F-DQ 8x24VDC/0.5A PP HF (6ES7136-6DC00-0CA0)
Equipment Manual, 12/2022, A5E38578424-AB
WARNING
Value range
• Disable
• Enable
1 to 65535 ms
1 to 65534
1 to 65534
0 to 65535
• Passivate the entire
module
• Passivate channel
• Adjustable
• All channels automati-
cally
• All channels manually
• Disable
• Enable
—
—
Default Parameter reas-
signment in RUN
Disable No
150 ms No
Dependent on param- No
eter assignment of the
F-CPU
Suggested by F- No
system
Calculated by F- No
system
Passivate channel No
(S7-300/400) Adjusta- No
ble
(S7-1200/1500) All
channels manually
Disable No
Suggested by F- No
system
Suggested by F- No
system
4
Scope
Module
Module
Module
Module
Module
Module
Module
Module
Module
Module
19