Extreme Networks ExtremeSwitching 5320 Series Hardware Installation Manual page 94

External Redundant Power Supply LEDs
The Power LED is located on the rear panel of the RPS. The following table presents the
LED status and recommended actions if the LED is off.
Color
Green
Off
94 ExtremeSwitching 5320 Series Hardware Installation Guide
Status
AC input to RPS is
within specifications.
AC input power
to RPS is out of
specification.
Recommended Action
None.
1. Check AC power cord connection to the
RPS.
2. Check AC power at the power outlet.
3. Swap power cord for a known good one.
If the problem persists, contact Extreme
Networks for support.
Monitor the Switch