Firebricks Installation; Back Firebricks Installation; Side Firebricks Installation; Floor Firebricks Installation - J. A. Roby STRATO Instruction Manual

Firebricks installation

Back firebricks installation

1) Place 4 bricks «A» at the bottom.
2) Put the 3 brick screws in the hole and for this purpose
Do not tighten up these screws too much, so that
washers will be easily installed.
3) Add 2 bricks «A» horizontally on the 4 bricks.
4) Tighten the 3 bricks screw.

Side firebricks installation

1) Put 3 "A" bricks between the right corridor and the door.
2) Repeat the steps before for the other side.
PR_I029/2023-08-24-EN

Floor firebricks installation

1) Put 7 bricks «A» and 1 brick« G » in the bottom as shown
in the picture.
Revision: 7
15