Table of Contents
Advertisement
3.7.1
ICMB Connector
The ICMB connector can be used to attach the Intel NetStructure MPCBL5525 System Master
Board via the Intel MPRTM4808 board to other systems based on the IPMI. To monitor the overall
system, the chassis can be connected via the Intel MPRTM4808 boards. The IPMI signals are
routed from the CPU via the backplane to the Intel MPRTM4808 board and are then available on
the ICMB connector.
The ICMB bus must be connected via a multi-drop cable or star topology.
The following figure shows how the pins are assigned.
Figure 17.
ICMB Connector Pinout
3.7.2
PS/2 Keyboard or Mouse
By using a keyboard/mouse splitter cable, you can use a PS/2 keyboard and a PS/2 mouse at the
same time. The cable is included in the cable assembly kit. This cable may be obtained from Black
Box Corporation (http://www.blackbox.com) or from other qualified vendors.
Figure 18.
PS/2 Keyboard/Mouse Connector Pinout
®
Intel
NetStructure™ MPRTM4808 Rear Transition Board Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
23
Advertisement
Table of Contents
Need help?
Do you have a question about the NetStructure MPRTM4808 and is the answer not in the manual?
Questions and answers