Table of Contents
Advertisement
3.5.2
Removal Procedure
1. Check all installed boards for steps to perform before turning off power.
2. Turn off system power.
3. Unfasten screws of front panel until Intel MPRTM4808 board is detached from rack frame.
4. Unlock handles by pressing on red handle buttons.
5. Press handles outward to disconnect the Intel MPRTM4808 board from backplane.
6. Carefully remove Intel MPRTM4808 board from slot, making sure not to bend any pins.
7. Turn on system power.
3.6
CompactPCI Connectors
The Intel MPRTM4808 board provides CompactPCI connectors J3, J4 and J5. The connector
pinouts in
Figure 12
Figure 12.
J3 Connector Pinout (Rows A-C)
®
Intel
NetStructure™ MPRTM4808 Rear Transition Board Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
through
Figure 15
show how the pins are assigned.
Installation
19
Advertisement
Table of Contents
Need help?
Do you have a question about the NetStructure MPRTM4808 and is the answer not in the manual?
Questions and answers